Mindray DPM 1 Manuel de l'opérateur télécharger pdf (Page 78)

9-4

5. The monitor will give a beep as the temperature measurement is complete. The

temperature reading is shown continuously.

6. Withdraw the probe from the patient’s armpit when accurate temperature reading is

obtained. Press firmly the ejection button on the top of the probe to eject the probe

cover. Return the probe into the sheath.

Temperature reading displays when final temperature is reached.

9.3.4 Measuring Rectal Temperature

1. Make sure that the rectal probe is connected to the probe connector and the indication

lamp beside the temperature unit lights to indicate that TEMP module properly

operates.

2. Select desired temperature type (the following procedure taking predict mode as an

example) and set TEMP POSITION to RECTAL.

3. Unplug the probe from the probe sheath and insert it into a cover in the probe cover

box. Press the probe handle down firmly until the cover engages with the probe.

4. After probe warmingup is ready, seperate the patient’s buttocks with one hand and

insert the probe 1.5 cm inside the rectum with the other hand. For pediatric patient,

depth of insertion shall be less. Tilt the probe so that it always contacts with patient’s

tissue. Lubricant can be used in rectal mode.

5. The monitor will give a beep as the temperature measurement is complete. The

temperature reading is shown continuously.

6. Withdraw the probe from the patient’s rectum when accurate temperature reading is

obtained. Press firmly the ejection button on the top of the probe to eject the probe

cover. Return the probe into the sheath.

Temperature reading displays when final temperature is reached.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 119 120

Pas de commentaire

Mindray DPM 1 Manuel de l'opérateur Page 78