Mindray TRIO Instructions d'exploitation télécharger pdf (Page 39)

System Menu Operations

2 - 10 0070-10-0666-01 Trio™ Operating Instructions

2.3.5.4 Analog Setup

The monitor can output an analog waveform from the analog output connector (AO1) on the

rear panel.

Select ANALOG SETUP from the MONITOR SETUP menu (see FIGURE 2-8). Select

ANALOG OUT, to set analog out to ON or OFF. Select ANALOG WAVE to select the

parameter waveform output. Choices are ECG and IBP (optional).

Select PREVIOUS MENU to return to the previous menu. Select NORMAL SCREEN (from

the menu or the Front Panel Keypad) to exit the menu and return to the normal screen.

FIGURE 2-8 Analog Setup Menu

2.3.5.5 Module Setup

MODULE SETUP allows the user to customize the display by selecting the parameters to be

monitored. Select MODULE SETUP from the MONITOR SETUP menu (see FIGURE 2-9).

FIGURE 2-9 Module Setup Menu

Select the parameters to monitor by using the Navigator™ Knob to select the item to be

displayed. A check mark will be displayed in the box next to each parameter selected. To

deselect a parameter, press the knob again (the check mark will be removed). Select

PREVIOUS MENU to return to the previous menu. Select NORMAL SCREEN (from the

menu or the Front Panel Keypad) to exit the menu and return to the normal screen.

NOTE: If the optional IBP is not installed, it will not be displayed in

the MODULE SETUP menu.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 169 170

Pas de commentaire

Mindray TRIO Instructions d'exploitation Page 39