Mindray DPM 1 Manuel de l'opérateur Page 49
- Page / 190
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
4-7
4.4 Multi-Screen Mode
As to the CMS which supports tri-screen or quad-screen mode, three or four displays can be
connected to the host. One display is set as secondary display, and others are primary displays
As shown below by the tri-screen mode, the two primary displays on the left always show
main screen, and the secondary display on the right always for auxiliary screen. In the mode
of tri-screen or quad-screen, a maximum of 16 monitors can be viewed at one time on each
primary display.
Figure 4-5 Tri-Screen Mode
4.5 Display Format
The display format of the multibed screen directly decides the size, number and layout of
patient windows. Please refer to 12.2.2 Display Setup- Number of Main Screen / Display
Layout for details.
Your Layout settings will take effect the moment the row and column are selected.
WARNING
z If the monitors connected to the CMS are more than the patient windows that
can be displayed on the screen, some monitors will be displayed in the non-spot
patient window in which only alarm status can be displayed. To view the
waveforms and parameters of a non-spot patient, you can switch it to spot
patient window.
- Operator’s Manual 1
- WARNING 3
- Warranty 6
- Exemptions 7
- Company Contact 8
- Preface 9
- Contents 11
- 1 Safety 17
- 1.1.1 Dangers 18
- 1.1.2 Warnings 18
- 1.1.3 Cautions 19
- CAUTION 19
- 1.1.4 Notes 20
- 1.2 Equipment Symbols 21
- 2 The Basics 23
- 2.3 Contraindications 24
- 2.4 Functions 24
- 2.5 Components 26
- 2.6 Networking Mode 27
- 2.7 Controls 28
- 2.7.2 Keyboard 29
- 2.7.3 Controls 29
- Radio Buttons 30
- Command Buttons 30
- Check Boxes 30
- List Box 31
- Drop-down List Box 31
- Tab sheet 31
- Installation and Maintenance 33
- 3.2 Installation 34
- 3.2.2 Power Requirements 35
- 3.2.3 Installation 35
- Receiver 36
- 3.3 Starting the System 37
- 3.4 Shutting down the System 38
- 3.5 Maintenance 39
- 3.5.2 General Cleaning 40
- 4 Display 43
- System Information Area 44
- Patient Window Area 44
- 4.3 Dual-Screen Mode 47
- 4.4 Multi-Screen Mode 49
- 4.5 Display Format 49
- 5 Patient Management 51
- 5.1.3 Auto Waveform Storage 54
- 5.4.1 Modify Procedure 56
- 5.5 Discharging a Patient 57
- 5.7 Changing to Idle Sector 58
- 5.8 Transferring a Patient 59
- 6 Multibed Screen 61
- 6.2 Patient Window 62
- 6.2.2 Spot Patient Windows 63
- 6.2.3.1 Bed Mark 64
- 6.2.3.3 Alarm Icons 66
- 6.2.3.6 Waveform Area 67
- 6.2.3.7 Parameter Area 68
- 6.2.3.8 Telemetry Icons 68
- 6.3 Display Setup 69
- 6.3.2 Multibed Numeric Setup 70
- 7 Viewbed 71
- 7.2 ViewBed Screen 72
- 7.2.1 Button Area 73
- 7.2.2 Waveform Area 73
- 7.3 Parameter Setup 74
- 7.4 Basic Operations 75
- 7.4.6 STANDBY 76
- 7.4.8 NIBP Measurement 76
- 7.4.12 Parameter Order 78
- 7.4.13 Record 78
- 7.4.14 Print 79
- 7.4.16 Show/Hide OxyCRG 81
- 7.4.17 Show/Hide NIBP Groups 81
- 7.4.20 Display ST Segments 83
- 8 Alarm Control 85
- 8.2.1 Audible Alarms 86
- 8.3 Alarm Volume 87
- 8.4 Alarm Setup 88
- 8.4.2 Alarm Setup Tab Sheet 89
- 8.5 Pausing Alarms 90
- 8.6 Silencing Alarms 90
- 8.8 Silencing the Monitors 92
- 8.9 Latching Alarms 92
- 8.10 CMS System Silence 93
- 8.11 CMS Audio Alarm Off 94
- 9 Review 95
- 9.1.2 Trend Review 96
- Selecting Trend Group 97
- 9.1.3 Waveform Review 98
- Normal Waveform Operation 103
- 9.1.4 C.O. Review 105
- 9.1.5 Event Review 106
- 9.1.5.2 Operation 107
- Sequencing the Event List 107
- Making Selection 108
- Locking and Unlocking Event 108
- Deleting Event 108
- 9.1.6 ST Review 109
- 9.2 Discharged Patients 111
- 9.2.1 All Patients 112
- Deleting Discharged Patient 113
- Refreshing Data 113
- FOR YOUR NOTES 114
- 10 Calculation 115
- Calculate 116
- Procedure 116
- WARNING 117
- 10.3 Oxygenation Calculation 119
- 10.4 Ventilation Calculation 121
- 10.5 Renal Calculation 122
- 11 Record, Print and Save as 125
- Installing Procedure 127
- 11.1.2 Recorder Operations 128
- Recording Normal Waveforms 129
- Recording Events 129
- 11.1.3 Recording Control 131
- 11.2 Print 132
- 11.2.3 Printing Operations 133
- Printing Renal Calculations 134
- Printing Graphic or Tabular 134
- Printing Normal Waveforms 135
- Printing ECG Report 135
- Printing Event Table 136
- Printing an Event 136
- Printing C.O. Measurements 136
- Printing ST Segment Waveform 136
- Printing in Real-time 137
- Printing 12-lead ECG 137
- Printing Multi-lead ECG 137
- Printing EEG Waveforms 137
- 11.2.4 Printing Control 139
- 11.3 Save as 140
- Graphic Trends 141
- Tabular Trends 141
- Normal Waveform Review 141
- Compressed Waveform Review 141
- C.O. Review 142
- Alarm Table Review 142
- Event Review 142
- Drug Calculation 142
- Hemodynamics Calculation 143
- Oxygenation Calculation 143
- Ventilation Calculation 143
- Renal Calculation 143
- DSA Graph 143
- 12 System Setup 145
- 12.2 Admin Setup 147
- 12.2.2 Display Setup 148
- Multibed Display 149
- Name Displaying Hotkey 149
- Multibed View Window Layout 149
- Auxiliary Window Setup 149
- 12.2.3 Alarm 150
- 12.2.4 Trend Group 151
- 12.2.5 Monitor List 152
- 12.2.6 Log 153
- 12.2.7 Telemetry 154
- Frequency Setup 155
- Discharge a patient 155
- Settings of Lethal Arrh. OFF 155
- 12.2.8 Other 156
- Change Hospital Name 158
- Auto Shrink Database 158
- Remote Control Settings 161
- 13 Remote CMS 163
- 13.2.1 Beds List 164
- 13.2.3 Technical Alarm Area 164
- 13.3 Remote CMS Review 165
- 13.4.1 IP Address Setup 166
- 13.4.3 Authorization 167
- Database Backup and Recovery 169
- 14.2 Backup Database 170
- 14.3 Recover Database 171
- 14.4 Rebuild Database 172
- 14.5 Shrink Database 172
- 15 System Help 173
- A Technical Specifications 175
- A.2 Recorder 176
- A.3 Wire Network 176
- A.4 Wireless Network 176
- A.5 Review 176
- A.6 Calculation 177
- A.7 Save as 177
- A.8 Print 177
- A.9 Record 177
- C Units, Symbols and Terms 181
- C.2 Symbols 182
- C.3 Abbreviations 182
© 2020, manymanuals.fr. Tous droits réservés | 0.058 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels